←
Hardware First77 posts
Hardware First avatar

Hardware First

@HardwareFirst_

Residency, 1 - 6 Nov at @thefoundingco_ Hosted by @pcbcupid, @captvenk Supported by @malpani, @tworkshyd

◷ Joined October 2026▧ 23 Photos and videos
Hardware First avatar
Hardware First@HardwareFirst_·Oct 15

Build the hardware you've always wanted to, but couldn't finish. Bring what you've built, Let's take it further at "Hardware-First residency" Fully funded living. Build, Design, PCB and Firmware support. Mentorship and Visibility to what you build. Apply: hardwarefirst.com 6 builders, 6 days, One villa. Nov 1 - 6, @thefoundingco_ (HYD) Hosted by : @PcbCupid x @CaptVenk

Post attachment
Capt Venkat 🇮🇳 avatar
⟳ Hardware First retweeted
Capt Venkat 🇮🇳@CaptVenk·Nov 12

@g_satheeshreddy had only a few minutes to spend at our @HardwareFirst_ showcase. He spoke with two builders, asked about their builds, tried the robotic hand and then asked me about Laksh. Before leaving, he said, “Let us know what you need, we will help. This is something good you guys are doing.” Then he added, pointing to the team, “Let me know more about the young boy :)” That made our day.

Post attachmentPost attachment

Eight hardware builders. Six days. And by the end, visitors were already asking when the next one would happen. That was the Hardware First Residency finale at T-Works, Hyderabad, on November 6, an initiative driven by Capt. Venkat (@captvenk). Eight builders worked side by side at The Founding Co. from November 1–6. Then visitors got to try what they built: a robotic hand, a flapping-wing robot, connected lamps, an ESP32-S3 handheld computer, a desk robot, and AirKords, an air guitar built by eight-year-old Lakshveer Rao of Projects by Laksh. What came back was the kind of feedback hardware founders rarely get: people holding the product and telling you what they think. Some said they'd buy when it's ready. Several offered to volunteer. A special thank you to Dr. G. Satheesh Reddy ( @g_satheeshreddy ), Former Chairman, DRDO and Scientific Adviser to the Raksha Mantri, for meeting the builders and encouraging their work. Congratulations to The Founding Co (@thefoundingco_). team and its founders on successfully bringing this six-day residency together and being an integral part of the experience. Builders want more chances to put working hardware in front of people, and Hyderabad wants to try it. If you're building hardware, what would make the next gathering worth your time? Tell us in the comments or DM us. @Min_SridharBabu @g_satheeshreddy @AnveshReddy_TG @DigitalMediaTG @TGRising2047 @CPRO_TGCM @jogitanikella @HardwareFirst_ @thefoundingco_ @bharathdotlife

Post attachmentPost attachmentPost attachmentPost attachment
Capt Venkat 🇮🇳 avatar
⟳ Hardware First retweeted
Capt Venkat 🇮🇳@CaptVenk·Nov 12

I messaged @jogitanikella just days before @HardwareFirst_ Residency and told him what we were trying to do. He called back and said, “Don’t worry, we’ll support the builders.” He made sure we had someone at T-Works to coordinate with and got the right teams involved. On his way to the Secretariat, he stopped at the house for a few minutes to meet the team. He was flying to Delhi that night, but even from there, he kept making sure we got the support the builders needed. Joginder ji, I won’t forget how you showed up for us. Thank you, and thank you to the whole T-Works team.

Eight hardware builders. Six days. And by the end, visitors were already asking when the next one would happen. That was the Hardware First Residency finale at T-Works, Hyderabad, on November 6, an initiative driven by Capt. Venkat (@captvenk). Eight builders worked side by side at The Founding Co. from November 1–6. Then visitors got to try what they built: a robotic hand, a flapping-wing robot, connected lamps, an ESP32-S3 handheld computer, a desk robot, and AirKords, an air guitar built by eight-year-old Lakshveer Rao of Projects by Laksh. What came back was the kind of feedback hardware founders rarely get: people holding the product and telling you what they think. Some said they'd buy when it's ready. Several offered to volunteer. A special thank you to Dr. G. Satheesh Reddy ( @g_satheeshreddy ), Former Chairman, DRDO and Scientific Adviser to the Raksha Mantri, for meeting the builders and encouraging their work. Congratulations to The Founding Co (@thefoundingco_). team and its founders on successfully bringing this six-day residency together and being an integral part of the experience. Builders want more chances to put working hardware in front of people, and Hyderabad wants to try it. If you're building hardware, what would make the next gathering worth your time? Tell us in the comments or DM us. @Min_SridharBabu @g_satheeshreddy @AnveshReddy_TG @DigitalMediaTG @TGRising2047 @CPRO_TGCM @jogitanikella @HardwareFirst_ @thefoundingco_ @bharathdotlife

Post attachmentPost attachmentPost attachmentPost attachment
Hardware First avatar
Hardware First@HardwareFirst_·Nov 12

Every builder from the cohort was awestruck by the magnificence of @TWorksHyd. Special thanks to Mr @jogitanikella for encouraging our initiative and hosting our demo day :) @thefoundingco_ @PcbCupid @CaptVenk

Eight hardware builders. Six days. And by the end, visitors were already asking when the next one would happen. That was the Hardware First Residency finale at T-Works, Hyderabad, on November 6, an initiative driven by Capt. Venkat (@captvenk). Eight builders worked side by side at The Founding Co. from November 1–6. Then visitors got to try what they built: a robotic hand, a flapping-wing robot, connected lamps, an ESP32-S3 handheld computer, a desk robot, and AirKords, an air guitar built by eight-year-old Lakshveer Rao of Projects by Laksh. What came back was the kind of feedback hardware founders rarely get: people holding the product and telling you what they think. Some said they'd buy when it's ready. Several offered to volunteer. A special thank you to Dr. G. Satheesh Reddy ( @g_satheeshreddy ), Former Chairman, DRDO and Scientific Adviser to the Raksha Mantri, for meeting the builders and encouraging their work. Congratulations to The Founding Co (@thefoundingco_). team and its founders on successfully bringing this six-day residency together and being an integral part of the experience. Builders want more chances to put working hardware in front of people, and Hyderabad wants to try it. If you're building hardware, what would make the next gathering worth your time? Tell us in the comments or DM us. @Min_SridharBabu @g_satheeshreddy @AnveshReddy_TG @DigitalMediaTG @TGRising2047 @CPRO_TGCM @jogitanikella @HardwareFirst_ @thefoundingco_ @bharathdotlife

Post attachmentPost attachmentPost attachmentPost attachment
Prithvi Reddy Devireddy avatar
⟳ Hardware First retweeted
Prithvi Reddy Devireddy@prithvireddy_dr·Nov 11

hyderabad has too many startups which operate without much pr & social media attention. popvax is undoubtedly the leader among them. followed bluj aerospace, dhruva aerospace, hala mobility, perceptyne robotics... now everyone knows skyroot but before their recent launch they were low-key.

We’re making a personalized cancer vaccine for Yash, a 34 year-old pancreatic cancer patient, in the open with his consent. We want external experts to review our design and make their own contributions before we manufacture it at the RNA Foundry. RNAFoundry.com/yash

0:52
The Founding Co. avatar
⟳ Hardware First retweeted
The Founding Co.@thefoundingco_·Nov 10

Applications for next cohort of our flagship startup residency - Assembly - Closing in next few hours. 47 new applications in last 2 hours ⏳ tik tok... tik tok Apply > thefounding.co/apply (5 hours to go)

Post attachment
Harshit Chandak avatar
⟳ Hardware First retweeted
Harshit Chandak@Harshit8822·Nov 8

Demo day at T-Works, Hyderabad🤖 My open-source humanoid hand mimicking people's gestures over BLE, built in 6 days at the Hardware First Residency. The kids loved it most. Seeing their curiosity spark was the best part.

Post attachmentPost attachment
0:20
0:26
Hardware First avatar
Hardware First@HardwareFirst_·Nov 9

that's how it happened 🫶🏽

I thought finding six serious hardware builders would be hard and raising ₹2 lakh would be easy. I got it backwards. Six days later, eight builders were showing their working products at T-Works. Here’s what happened in between.

The Founding Co. avatar
⟳ Hardware First retweeted
The Founding Co.@thefoundingco_·Nov 8

To all the founders. We'll cover your stay, food, credits and living costs for 70 days! You just build. No equity when you join. Assembly is a live in startup program in Hyderabad, by The Founding Co. Applications close in 2 days.

1:20
Hardware First avatar
Hardware First@HardwareFirst_·Nov 7

Some people support an event. Some people become the reason it runs smoothly. @JaswanthBeere from @thelaunchd was the latter. He came to the hacker house, spent time with every builder, listened to their stories, documented their journeys and helped take their work to a wider audience. And behind the scenes, he helped with event coordination, execution and all the little things that needed attention. Hardware First would have been much harder to pull off without him. Thank you, Jaswanth. You were truly part of the team.

Post attachment
Hardware First avatar
Hardware First@HardwareFirst_·Nov 7

A big thank you to Bharath for showing up for our Hardware First builders. He came to the hacker house, spent time understanding their projects, helped with mechanical design challenges and supported us with 3D prints whenever needed. The kind of support that doesn't always make it into the photographs, but makes a real difference to what gets built. Thank you, Bharath, for being there. @bharathdotlife

Hardware First avatar
Hardware First@HardwareFirst_·Nov 7

One of the most valuable things in a 6-day hardware residency is time. @Teja_Manchu Sai Teja understood that. He generously made a Bambu Lab X1C 3D printer available to our builders so they could print, test, redesign and keep moving without waiting. He even offered space at their institute if we needed it. No big promises. Just real support when it mattered. Thank you, Sai Teja and @nxtwave_tech !

Post attachmentPost attachment
Hardware First avatar
Hardware First@HardwareFirst_·Nov 7

What a finale for Hardware First Residency at @TWorksHyd T-Works! Thank you @jogitanikella Joginder sir for all your kind support. After 6 days of building, our 8 builders got to put their working creations in front of people and demonstrate what they'd made. A huge thank you to T-Works for hosting our showcase, inviting @g_satheeshreddy Dr. Satheesh Reddy as chief guest and giving builders the opportunity to interact with him. And for supporting the builds themselves through 3D printing and rapid prototyping. You helped us both build and showcase. Thank you!

Post attachmentPost attachment
Hardware First avatar
Hardware First@HardwareFirst_·Nov 7

A big thank you to @usesillycuts SillyCuts, and especially @AskBaluBabu and @IKnowJoy They didn't just offer design support from a distance. They personally came to the Hardware First hacker house, worked alongside the builders and helped solve real product design challenges. The difference between a prototype and a usable product often comes down to details like these. Thank you for being there and making things happen.

Post attachmentPost attachment