Simulated Environments for Robots. Robots don't have enough data. So we're making virtual worlds for them to train in! Brothers: @SaroyaShehryar @AhmadSaroya00
We’re huge fans of Moonlake and good friends with their CEO - love their work and we’re excited to support them in their future endeavours and research at Moving Atoms!
The RL era of robotics is here, and simulation is how to scale it.
An early look at our research on a achieving a better scaling paradigm for robot learning with simulation 👇
Introducing self-serve Scan to BIM and SIM Ready from @MovingAtomsLab
Bring us a LiDAR or SLAM scan. Our platform turns it into a Revit-ready BIM model and SimReady world within 48 hours, completely on its own.
The new part: you can now direct the work. Talk to Atom, our modelling agent, mark the spots that need attention, and watch the changes land in your model.
If you're in AEC, you decide where the detail goes. Care about pipes, gauges, valves or fittings? Point them out, and Atom models them the way you need, matched to the scan.
Have a tolerance to hit? Tell Atom. Every element is measured against the scan, with its accuracy shown, so nothing about the fit is hidden. Export to Revit, IFC or STEP AP242.
Scan in. Model out. You stay in control.
We’re creating a 4D living model of the real world.
From indoor spaces to entire cities, Moving Atoms is turning the physical world into accurate, high-resolution 3D models. Each object is separated, physics tuned and has its own Mesh.
This was Created by the Moving Atoms Engine.
Export files include: Isaac Sim, Newton, IFC, Revit , USD.
We’re creating a 4D living model of the real world.
From indoor spaces to entire cities, Moving Atoms is turning the physical world into accurate, high-resolution 3D models. Each object is separated, physics tuned and has its own Mesh.
This was Created by the Moving Atoms Engine.
Export files include: Isaac Sim, Newton, IFC, Revit , USD.
Moving Atoms (YC S26) introduces Scan to 3D Model.
One click turns any LiDAR or SLAM scan into a segmented, fully editable BIM model, ready to export to Revit, IFC, STEP, USD or Isaac Sim.
How it works:
1. Upload your scan. It opens instantly in our 3D viewer, which handles sites up to 5,000,000 sq ft.
2. The engine builds the model. It splits the scan into individual objects, measures each one and generates a native BIM element for every object.
3. Every point is checked. A heatmap shows where the model differs from the scan, and the engine refines each discrepancy until the model matches to within 5 mm.
How Moving Atoms accurately converts Lidar/Slam scans into full 3d building Info Models.
1. Capture: the raw laser scan (here, 54M points) is reconstructed into a dense, photoreal Gaussian splat.
2. Model: every pipe, fitting, valve and steel member is built as a native BIM element.
3. Heatmap: every scan point is checked against the model, and gaps and misfits are flagged automatically.
4. Measure: cross-sections are fitted to the real points, e.g. a Ø170 mm header at a 3.7 mm median error.
5. Rebuild: the model is refitted and exported as native Revit families and IFC.
Scan is returned within 48 hours.
The final model sits within 2.1 mm median of the scan.
Send us a scan and see what comes back.
Moving Atoms (YC S26): Scan to Sim/BIM now runs Locally!!!
We fly to your facility with the compute to run the full conversion locally, and your scan data never leaves the building. Within 48 hours you get back a simulation-ready digital twin of your site. Every object is separated and editable, delivered in the formats your team already uses: Revit, IFC, OpenUSD, Isaac Sim and glTF.
That opens up the buildings that need digital twins most but could never share their data: data centres, government buildings, critical infrastructure and secure labs. Plan upgrades, test layouts and run simulations of your most sensitive spaces without a single file going off-site.
A scan gives you a picture. A simulation needs objects.
We can output Revit files, USD, IFC. Anything needed for BIM/Simulation workflows.
This is a real process plant in Rotterdam. On the left is the raw LiDAR, about 5 million NavVis points. On the right is our reconstruction, filmed from the same camera.
Most scan-to-3D pipelines stop at one fused mesh, which looks right but behaves like a single rock. A robot can't open, avoid or reason about something it can't tell apart from the floor.
So after we rebuild the geometry, we separate the scene into objects. In this plant that's 89 of them: pumps, vessels, heat exchangers, stairs, guardrails, pipe networks, foundations. Each one:
→ is its own mesh with its own pivot point, so you can select it, move it or swap it
→ is labelled by type, like "pump assembly" or "vertical heat exchanger"
→ traces back to the scan panoramas and points it came from
→ is flagged where we had to infer hidden geometry rather than measure it
Moving Atoms (YC S26): Scan to Sim is here.
Send us a LiDAR or SLAM scan of your factory floor, warehouse or yard, from any scanner. Upload multi-gigabyte scans straight from your browser (up to 200 GB per file). Within 48 hours you get back a simulation-ready digital twin of your real site. Every object is separated and editable, and accurate robot embodiments are placed right on your floor: autonomous forklifts, pallet AMRs, tuggers, tote robots and palletizing arms.
Test the workflow before you build it. Try layouts, fleet sizes and routes, then watch the whole operation run sped up, before a single robot arrives on site.
Moving Atoms (YC S26): Scan to BIM is here.
Send us a LiDAR or SLAM scan from any scanner, of any site: outdoor industrial plants, refineries, factory floors, warehouses or full buildings. Upload multi-gigabyte scans straight from your browser (up to 60 GB per file). Within 48 hours, every object comes back separated, measured and editable, in IFC, Revit, STEP, USD or GLB. It's ready for your BIM team and your digital twin.
Dm us if you like our work.
Scan to BIM is finally here from Moving Atoms.
What you're watching is a real workshop, captured on site and rebuilt by our model. 767 objects, and every one of them is its own mesh. You can pick it up, move it and simulate it.
Moving Atoms (YC S26) : Scan to BIM is here:
Send a LiDAR or SLAM scan from any scanner. Within 48 hours every object comes back separated, measured and editable, in IFC, Revit, STEP, USD or GLB: ready for your BIM team, your digital twin.
Who this is for:
-> Data Center Requiring a Digital Twin
→ Manufacturing floors and production lines
→ Warehouses and logistics / fulfilment centres
→ Wet labs and scientific facilities
→ Commercial kitchens and food production
→ Any site where you plan to put a robot and want to test it there first