←
Naaackers59,816 posts
Naaackers avatar

Naaackers

@Naaackers

Tech education + DIY project videos by day, Owner of @nackhabitat for 3D printing, design & product development by night. Email: naaackers.com/contact

◷ Joined July 2014▧ 10,033 Photos and videos
Naaackers avatar
Naaackers@Naaackers·Nov 10

If you want to mount your @Corsair Xeneon Edge like a BOSS, then I have great news for you. Now you can. The Zenny for the Xeneon Edge is here. Here's the launch video!

16:22
Naaackers avatar
Naaackers@Naaackers·Nov 17

Can someone recommend me their favorite guitar tuning app for smart phones Do not say Fender tune. Three times in the last couple months I've tried to save a tuning at it either a) says "error" and doesn't save b) acts like it saves but does nothing. Unreal.

Naaackers avatar
Naaackers@Naaackers·Nov 17

I woke up thinking about the Godfather from DiBellas subs but every location near me closed and life isn't fair. Everything bagel seasoning on bread was genius.

Post attachment
Naaackers avatar
Naaackers@Naaackers·Nov 17

My girlfriend said I'm not allowed to buy or deploy any new servers, but it's a proxmox host with Windows Server 2022 and the linux bois in my comments say windows servers don't count so I think i'm good

Naaackers avatar
Naaackers@Naaackers·Nov 16

The Zenny for the @CORSAIR Xeneon Edge is live in the shop!

The Zenny, a modular 1/4" adapter for the Xeneon Edge is now available for ordering ❤️ For the next 2 weeks, all pre-orders are automatically 10% off, and they start shipping out in a few weeks. Check out the item description for more details. ⬇️

Post attachmentPost attachmentPost attachmentPost attachment
Naaackers avatar
Naaackers@Naaackers·Nov 13

Quick and dirty update on 7+ different @NackHabitat products including the Spoosa, Veptor, Deckbutt, and 3 new VESA adapters for portable monitors. Some just dropped, some dropping on Monday, and December is another product launch: Spoosa ❤️

5:23
Naaackers avatar
Naaackers@Naaackers·Nov 13

Congrats to @byjono who won the Corsair Xeneon Edge giveaway! I'll reach out ❤️ But that's not all! Code "Zenny" will get you 10% off the @CORSAIR Xeneon Edge starting today. ⬇ Below is the coupon

Post attachmentPost attachment

If you want to mount your @Corsair Xeneon Edge like a BOSS, then I have great news for you. Now you can. The Zenny for the Xeneon Edge is here. Here's the launch video!

16:22
Naaackers avatar
Naaackers@Naaackers·Nov 12

I'm continuing to play around with agentic video editing, but in a different way. I've got a multi-PC + network project folder setup right now that's kinda nifty. - I ingest footage to the Ubuntu machine, and provide instructions via OpenClaw. Video type, length, format, orientation, etc. It puts all the video, audio, and text into the right folders and auto generates proxies - It creates the project in a Network project location, and within that project creates a new timeline for each video I want. All following a naming and folder structure I created. - I've synced my effects, presets, video editing assets, and other things between the Mac and Ubuntu machine so that Ubuntu can access assets I use over and over (SyncThing) - It's able to use project templates so my audio, captions, intros all follow the same format. - I don't have it render anything. It handles the first 50% of the edit, and when I'm ready to step in and finish, I open the project on my Mac and pick up where it left off like I'm on the same PC. Sometimes the base edit is great, sometimes it's useless. It's crazy to be sitting here editing videos on my mac, and watching the Ubuntu PC edit other video projects at the same time. Screen just going crazy while I'm sittin here not touchin it. It's able to handle a lot of the heavy lifting of getting a video started and since it's on it's own computer, I don't feel the performance hit on my main machine.

Post attachment

I finally got around to trying "agent video editing", via OpenClaw + Claude Code. Here is what I did, how it's setup, what it cost, and my thoughts. My setup is different than most of the tests I've seen. TL;dr? Shheeeeeiiiiiiiiiitttt The initial goal Pop the SD card into my dedicated AI miniPC, copy footage to a root folder, have the AI PC via OpenClaw + ClaudeCode take all that footage, put it all in it's own folders, cut silences/repeats/mistakes, and give me as many rough cuts of videos as possible. All this would be done in synced folders that are accessible on my mac, so when it was done I could just open DaVinci on my mac and pickup where it left off. (Btw my dearest @Game_Dev_Carto here is another example of having a dedicated media PC for content workflows.) The sync is not necessary to edit form the mac, I could easily The setup + talk - 40 minutes of talking head footage, single cam, across 5 video files. 60gb footage. I had rough talking points, and figured I could get 6-8 videos out of all of them. I did not provide the talking points to open claw. They were offloaded from SD to to my Ubuntu 24 AI pc (the @Nimo_PC 4L, provided as a gift btw) That ingest folder is setup to auto sync everything over to my mac as well for backups. - OpenClaw runs on that Ubuntu machine, and I have a single session that exclusively uses the opus 5.5 model via claude code. This way it's all non-api billing and very cost effective. I chat with open claw on my mac and phone remotely. - Before staring this project, I built my normal DaVinci project folder structure, and instructed openclaw to repeat this same folder structure for every video it cuts together. That template folder example stays on the network for it to reference. All audio, video, photo stuff in it's correct folders. It also exports a .drb for every timeline it creates. I ended up with 6 videos, 6 timelines, in 1 project. - When I film with my S9, I use two mics. The Deity D4 and a wireless LAV. the Deity is awesome because it's a mini shotgun mic that has an additional 3.5mm input on it. Which means you can put one mic in the left mic channel, and one mic in the right. So I said "for every video clip, duplicate the audio into a second track, set track to mono, track 1 uses left mono, track 2 uses right mono" and then I can go in and choose what mic I want to use based on if I'm sitting near camera or up and walking around. It did that perfectly, and I have two mics to choose from for every video. What it was able to do without me touching it: - Ingest all footage, organize the footage into folders following my folder structure, and sync all that to my Mac - I told it "based on my rough notes for these videos, cut these together to make enough videos to cover each subject matter. Take your best shot at guessing what videos I want made" and it gave me 7 for sure videos from start to finish and 4 that were maybe good enough to be videos. These were not full edits, it was just cutting out repeats, mistakes, silences, etc. It gave me 6 videos. Based on my other workflows and previous tasks, my OpenClone knows that I prefer my videos to be in between 1 minute and 2 minutes and 30 seconds, so it automatically assumed my videos were going to be close to that and aimed for that length. - Generated captions (which I could easily auto export as .srt files too) - It exported drafts of each one so I could watch it before I went in and finished the edit. What it didn't do because I didn't ask and what I did after - Create proxies - Color grade - choose audio tracks - audio mastering (didn't ask but I could templatize this so easy. They're already davinci presets) - Zooms, broll, effects, on screen text, etc. The bad: - It removed a LOT of talking head to try and cut it down for short form. There was a good amount of going back in and grabbing things I said that were important to keep in the video. - Audio/Video clips were not linked on the timeline, so going back and making additional edits was a little tedious. I hate this. - I'm lucky enough to have a $3500 mini PC with 64gb ram and 64gb of other ram dedicated to the GPU that handled all this while I worked on my mac. So I wasn't impacted by the workload at all. If you weren't using a dedicated machine, you probably couldn't use your main machine while this was happening. That's a big Cost: -1h46m -Just under 10 millions tokes = 8% of my weekly usage on $20/month plan, which means I could run this same task 50 times before the month was over. For $20. Shheeeeeeeesh. Summary: I rank this a 9/10. I would likely spend 30 minutes to an hour on each of these shorts to finalize them, and even that could be shortened. I don't have any plans to edit full videos via AI. I still want that personal touch and interaction before it becomes content online. But automating all this before I even sit down for the first time? Why the fuck wouldn't I? That's 2 hours I worked on something else, not impacted by the workload because it was on another PC. And the minute the files were copied from the SD card, they were backed up. Extremely valuable, will absolutely continue to test. I could easily pipe this into my other automations so it would 1. create a new database entry in my content database for each video 2. generate the hashtags, seo, descriptions 3. create the thumbnails based on my templates 4. schedule them to post once a day 5. collect all the analytics after 7 days of posting. At some point when it becomes financially possible i'd love to have an editor for some things. And if I could provide a single folder with 6 project files, all the RAW videos and my outlines/scripts for them to polish up, that turnaround time would be so faster compared to them raw dogging it from scratch. Seems like a no brainer. Anyways thanks for reading okay bye bye now

Post attachmentPost attachment
Naaackers avatar
Naaackers@Naaackers·Nov 12

Making users visit your website to manually download an update for your software should be illegal.

Naaackers avatar
Naaackers@Naaackers·Nov 12

It's been several months now and I'm still using an app I vibe coded for myself to manage the 3D business. It has been amazing in so many ways am I'm not stopping anytime soon. 1 of 4 apps I use daily for business stuff. - Syncs all data from each store via API, brings orders from all stores into 1 feed - Gives me 1 click print access to customized receipts and packing slips so they're the same for every store - Allows me to manage all details, SKU's, links, files from 1 place - I generate and print shipping labels from within the app via Shippo API. Shipping dimensions and weights are assigned to kits so shipping label creation is 1 click - Stores all print time + material cost per part so I can generate cost analysis on the spot - Keeps all the materials I use in database for reuse, great for reordering and adding materials to kit quotes for cost analysis. Runs locally on an SSD workstation and I access it over the network and it's lightning fast at everything. It does only exactly what I need, and when my needs change, I change it. It's the greatest.

Post attachmentPost attachment
Naaackers avatar
Naaackers@Naaackers·Nov 10

Thanks for all the love yesterday for the @CORSAIR Xeneon Edge adapter. I'm super pumped to finally launch this next Monday as it's been one of the most highly requested products. The giveaway for the Xeneon Edge closes this Friday so get your entries in!

Post attachmentPost attachmentPost attachmentPost attachment

If you want to mount your @Corsair Xeneon Edge like a BOSS, then I have great news for you. Now you can. The Zenny for the Xeneon Edge is here. Here's the launch video!

16:22