←
PTC STEM1,001 posts
PTC STEM avatar

PTC STEM

@PTC3645

Inventor and supplier of the IR-SENSE and other near-infrared (NIR) photonic and lighting technologies for healthier living.

◷ Joined May 2025▧ 351 Photos and videos
PTC STEM avatar
PTC STEM@PTC3645·19m

See those deep dips in the infrared (IR) range of the solar spectrum? Those are atmospheric absorption bands. Gases in our air—mostly H₂O, O₂, and CO₂—soak up those specific IR wavelengths, which is what heats the atmosphere around us.

Post attachment
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 18

Here are the transmission spectra of a green leaf. Notice how they compare to the spectral power distribution (SPD) measured for the red leaves shown above.

Post attachment
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·11h

Modifying the bulbs is very simple, by the way. This video shows how the IR-CAP works at producing near-infrared light from standard bulbs. This is only for illustration and should not be attempted with the power on. We have installation details on our web site.

0:55
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 17

For those who don't get enough infrared from outdoor sunlight, there is a simple and inexpensive fix to indoor lighting.

0:55
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Oct 26

I asked ChatGPT to indicate the telluric lines on the spectral graph for the sunset but the results were completely off. Not a single one matched! Even when I kept trying to correct the algorithm and repeatedly asked it to align the arrows with the wavelength values on the x axis, it still didn't know how to do it.

Post attachment
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 18

My previous post showed the transmission spectrum of red leaves, so here are the spectra of a green leaf for comparison. This is essentially what the spectral composition of typical tree shade looks like beneath a dense canopy.

Post attachment
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 17

Please don't throw away your standard LED bulbs. There is a simple and inexpensive fix that can help us all avoid an environmental disaster.

0:55
PhosphorTech Corp avatar
⟳ PTC STEM retweeted
PhosphorTech Corp@phosphorte60569·Nov 17

You can also add an inexpensive IR-CAP to any standard LED bulb.

0:55
David Krieger avatar
⟳ PTC STEM retweeted
David Krieger@PragmaticNurse·Nov 17

You can also take a look at @PTC3645's products if you want to modify the bulbs you have. I think this is a pretty good option and ordered their IR-Caps.

Kristie Leong M.D. avatar
⟳ PTC STEM retweeted
Kristie Leong M.D.@DrKristieLeong·Nov 1

One question is whether typical indoor exposure from these bulbs produces enough irradiance to have biological effects in humans. Hoping they'll compile more evidence.

PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 1

There is also a time factor to consider. The exposure (dose or fluence) is calculated by multiplying the irradiance (power per unit area) by the exposure time. For those interested in a low-cost measurement tool, we offer a free online app that works with the IR-SENSE film.

1:43
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 1

Adding deep red and near-infrared light to the standard LED bulbs we use everywhere is very simple using this proprietary IR-CAP photonic technology.

1:40
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 7

Narrow-band LEDs can be improved using the IR-CAP photonic technology. It converts ~50% of visible LED light into full spectrum with invisible NIR, just like sunlight. The following video explains how.

1:40
PTC STEM avatar
⟳ PTC STEM retweeted
PTC STEM@PTC3645·Nov 17

The IR-CAP technology is a revolutionary simple fix to the infrared-deficiency problem with standard LEDs.

0:55