🚨 Chennai-based Agnikul Cosmos (@AgnikulCosmos) has test-fired a pump-driven version of its Agnilet semi-cryogenic engine ahead of Mission-02.
The single-piece, fully 3D-printed engine now uses electric motor-driven, 3D-printed pumps and demonstrated throttling during the test.
🚨 General Autonomy (@GeneralAutonomy) has won gold in India's first RobotDog race.
Their quadruped, PARAM, cleared the 50m dash in 11.2s (home straight) and 10.8s (back straight).
PARAM averaged 4.55 m/s, but is capable of a top speed of 7 m/s.
Indian passenger drones are almost here!
Bengaluru-based Aexo Aerospace (@aexoaerospace) has built an indigenous passenger drone demonstrator called Aer Genesis. It has:
- 30+ minutes flight time
- 1,500 ft max altitude
- 110 km/h top speed
- 95 kg max payload
- 60 km range
🚨 Pune-based Olee Space (@Olee_space) has powered an LED wirelessly using a laser, converting light into electricity.
This test follows their earlier 600 W transmission across 430 m. Their goal is to build mid-air drone charging, eVTOL refuelling and space-based solar power.
A lab in Bengaluru is building brain-inspired chips from molecules, designed to be nearly 100x more energy-efficient than today's GPUs.
Led by Prof. Sreetosh Goswami this team of ~30 chemists, physicists and engineers is based out of the Centre for Nano Science and Engineering (CeNSE), IISc.
Here's the problem they're solving. The computers we use today (GPUs included) were never designed with AI in mind. They keep data in one place and do the calculations in another, so every step means sending data back and forth between the two. Engineers call this the von Neumann bottleneck. Everyday software barely notices it, but AI does, and that's because a neural network multiplies millions of numbers at once. Even the most advanced AI hardware spends a remarkable share of its energy simply moving data around.
Now imagine a chip where memory and computing happen in the very same place. Not just side by side on one chip, as in modern phones and laptops, but with the calculation taking place inside the memory itself. That is how the human brain works, and it's also what this team is building.
The MoNC-AI research group (Molecular Neuromorphic Computing for Artificial Intelligence) designs tiny molecular devices called memristors. A silicon transistor stores a simple 0 or 1. Each of these molecular devices can hold more than 16,000 distinct levels. That richness enables them to carry out the central operation of AI in a single step, instead of thousands.
Because these chips need only a fraction of the energy, they could bring powerful AI to phones and laptops, without relying on the vast power and cooling of data centres.
The technology born in this lab is now being taken to market by MBrain AI, a company co-founded by Prof. Goswami with IISc colleagues and semiconductor industry veterans. Alongside the chips, MBrain AI is building the software that lets everyday applications run on them, and is working towards its first fully packaged chips for customers over the next couple of years.
🚨 Bengaluru-based Thinking Balloon (@thinkyballoon) has successfully tested their autonomous tethered aerostat for 3 days continuously.
The system can launch, hold position, dock and refill lift gas autonomously, with larger versions planned to carry hundreds of kg above 1 km.
You'll find one specific Indian robot brand at the facilities of all the following giants:
- TVS
- Bosch
- Airbus
- Hyundai
- Samsung
- Harley-Davidson
Ati Robotics (@atirobotics) has deployed robots across 70+ global factories. Here's how they're building them in Bengaluru.
🚨 Gurugram-based Pluto (@plutomobility) is successfully running their first pilot.
Their purpose-built electric three-wheeler has:
- 45 km/h top speed
- 3 kWh battery capacity
- 100 kg/200 L payload capacity
Delivery drivers only need an L1 bike licence to drive a Pluto.
🚨 Ahmedabad-based PierSight (@piersightspace) has successfully integrated and tested the structural qualification model of their first commercial SAR + AIS satellite, Varuna 2.0.
The company’s long-term goal is to build a 32-satellite constellation for persistent maritime surveillance. This is part of PierSight’s main philosophy of building Synthetic Aperture Radar (SAR) systems tailored to specific applications across sectors such as maritime, Earth observation, and more.
Use cases of the Varuna constellation include:
- EEZ surveillance
- Maritime insurance
- Illegal fishing monitoring
- Oil spill/dumping detection
- Identifying ship movements and patterns
Many people mistakenly believe that ideaForge (@ideaforge_tech) began their journey with quadcopter drones.
They didn't.
RuntimeBRT recently took a tour of ideaForge's facilities in Mumbai. During this visit Ankit Mehta revealed that ideaForge's first project was a hovercraft.
In 2004, while studying at the IIT Bombay, Rahul Singh came up with the idea to build a hovercraft to navigate Powai Lake. That ambition is what brought him together with his co-founders, Ankit Mehta and Ashish Bhat, later joined by Vipul Joshi in 2008.
They would eventually pivot toward building the UAVs that the company is known for today. These drones have enabled the company to become India’s largest pure-play UAV manufacturer by market share, with ~50% in the domestic drone segment.
One ideaForge drone takes off every two minutes.
More than two decades after the hovercraft, ideaForge continues their culture of innovation with something new: ZOLT, a multi-role tactical UAV platform designed to operate in contested combat environments. This UAV also introduces a hybrid propulsion system to enable longer-endurance missions, expanding ideaForge’s capabilities alongside its electric UAV portfolio.
In this tour, Ankit Mehta (@ankit_ideaForge) shows us ZOLT, ideaForge's SWITCH UAV manufacturing facility, and everything else the company is working on. Enjoy!
🚨 Pune-based Quintrans (@QHyperloop) has built and tested a scaled prototype of their automated container-handling system for ports.
The linear-motor platform moved a 1-tonne load at 10 km/h on a guided track, as the company works to automate container movement inside ports.
🚨 Hyderabad-based Harvested Robotics (@HarvestedLabs) has developed a 2-axis laser-steering system for Rakshak, their AI-powered laser weeder.
This system aims the laser at weeds identified by Rakshak’s vision software and can detect and burn them in under 0.5 seconds.
This is India's first and only unmanned, AI-piloted fighter jet.
It's called FWD SUPREME and it's being built by Flying Wedge Defence & Aerospace (@Flying_Wedge_).
We visited their Bengaluru factory to understand how they're ushering in a new era of autonomous Indian airpower.
🚨 Hyderabad-based Kaara Space (@Kaara_Space) has completed the first integrated vacuum test of their Hall-effect thruster prototype.
The 550 W argon-powered thruster is designed to produce 15 mN of thrust and is being developed for satellites in the 200-500 kg class.
🚨 Hubli-based Gridflow has developed an autonomous electric pod transit system prototype, with pods travelling on dedicated guideways.
Their pod is designed to carry up to 4 people or 400 kg at 30km/h, with a 60 km/h full-speed demonstration planned on a longer guideway.
This Indian robot has the potential to upgrade how global factories automate manufacturing. It features:
- Proprietary actuators
- A bespoke AI stack
- Patented effectors
- Custom motors
Here's how Perceptyne (@perceptyne) is building the PR-OMNI semi-humanoid in Hyderabad.