←
Snaptrude628 posts
Snaptrude avatar

Snaptrude

@snaptrude

Design better buildings together

◷ Joined July 2015▧ 408 Photos and videos
Snaptrude avatar
Snaptrude@snaptrude·Oct 29

Snaptrude Agent is live. It does real design work with your team, from a site to a construction-ready LOD 400 model with structure, MEP and drawings. Cut the budget or change the brief, and the agent updates the layout, coordinates the structure and MEP, and redoes the drawings. And you can take the work back to your existing software with your families intact. Firms like Jacobs, Studio+, Kajima, VMDO and Dekker design on Snaptrude, and since September more than 2,000 designers have run over 25,000 tasks through the agent.

Today we're launching @snaptrude Agent, the most advanced agent for building design. It does real design work with you, from a site to a construction-ready LOD 400 model with structure, MEP and drawings. Then can go back to your existing software with your families intact. About a year ago we bet the company on AI. Honestly the insight came from software engineering. It wasn't long ago that autocomplete felt like a big deal, and now engineers direct agents that write a lot of the code. I think the same shift is coming to how we design buildings, and it's already started. Most designers I meet aren't short on skill, they're short on time. Take the call every design team dreads, the client cuts the budget by 30%. Today that's a bad month for everyone. With the agent you're the director. You decide where the cost comes out, and it updates the layout, coordinates the structure and MEP, and redoes the drawings. So when design exploration gets this cheap, we go from 3 options to 300, and more options means better buildings. Since August our users have gone through more than 140 billion tokens, and firms like Jacobs, Studio+, Kajima, VMDO, Dekker and hundreds of others use Snaptrude today. In our early access, more than 2,000 designers have run over 25,000 tasks through the agent since September. We also built a benchmark for this, AECBench, because in AEC an almost correct answer is still wrong. It gives AI the same brief an architect would get, has its design in a real BIM model, and scores the result against the brief and against how architects review design. We're publishing the first results today, link below. Thank you @prashanthp at @Accel and Shub and the team at @foundamental for backing us when this was still a bet, and the Snaptrude team, who built every bit of this. Really proud of you all. Thanks to our investors, @scottbelsky, @andreasklinger, @thilokonzok, @immad, @CindyXBi, @DanilaVladi, @jmwass, rahulchaudhary, @adamecourt, Zach Ginsburg, Alex duff, Paul grossinger, really appreciate all the help along the way.

1:52
Snaptrude avatar
Snaptrude@snaptrude·Nov 17

Your library has a generic curtain wall. Your project uses a specific vendor’s system. Give Snaptrude Agent the spec sheet. It models that exact system down to the anchors, nuts and bolts, and places it into the facade as an editable family.

0:22
Snaptrude avatar
Snaptrude@snaptrude·Nov 12

Turning CAD plans into BIM usually means tracing every floor again. We gave Snaptrude Agent the DWGs for an 8-floor hotel and one prompt. It asked a couple of questions, then built the full BIM model. Every element stays editable. snaptrude.com

1:07
Snaptrude avatar
Snaptrude@snaptrude·Nov 9

The brief changes, and you redo the model, the systems and the drawings by hand. You can now take one prompt from site analysis to LoD 400 BIM, MEP and construction-ready drawings with Snaptrude Agent. Every step stays editable. Altaf Ganihar on why: snaptrude.com

1:05
Snaptrude avatar
Snaptrude@snaptrude·Nov 6

“Create massing options for this project to explore different architectural ideas.” Same site, same program, same GFA. A different idea every time. snaptrude.com

0:23
Snaptrude avatar
Snaptrude@snaptrude·Nov 5

Same site. Same program. Same GFA. Snaptrude Agent explored massing options for a 453,000 sq ft office campus, each one a different idea, each within 2% of the brief. snaptrude.com

0:21
Snaptrude avatar
Snaptrude@snaptrude·Nov 4

A hospital and a housing block need different thinking from day one. Snaptrude Agent reads your project's typology, brief and existing design, then works within it. Any building type, any stage. snaptrude.com

0:06
Snaptrude avatar
Snaptrude@snaptrude·Nov 3

One prompt. Snaptrude Agent lays out HVAC, plumbing, sprinklers and lighting across a full floor of your BIM model. Every duct, pipe and fixture stays parametric, so you can edit anything it places. All in-app footage. snaptrude.com

0:24
Snaptrude avatar
Snaptrude@snaptrude·Oct 30

Yesterday we released Snaptrude Agent. It takes a building from an empty site to a construction set: massing, LOD 400 BIM, MEP, structure and drawings, ready for Revit. It shows you its plan first, and you steer. Try it live: snaptrude.com

0:21
Prashanth Prakash avatar
⟳ Snaptrude retweeted
Prashanth Prakash@prashanthp·Oct 30

Construction has barely changed in decades and products like @Snaptrude are leading its transformation. When we began working with @altafganihar, we saw a sector overdue for modernizing its workflows. With the launch of Snaptrude Agent, they've built the most advanced agent for building design with published benchmarks on real design tasks. Congratulations to @altafganihar and the entire @snaptrude team on this milestone.

Today we're launching @snaptrude Agent, the most advanced agent for building design. It does real design work with you, from a site to a construction-ready LOD 400 model with structure, MEP and drawings. Then can go back to your existing software with your families intact. About a year ago we bet the company on AI. Honestly the insight came from software engineering. It wasn't long ago that autocomplete felt like a big deal, and now engineers direct agents that write a lot of the code. I think the same shift is coming to how we design buildings, and it's already started. Most designers I meet aren't short on skill, they're short on time. Take the call every design team dreads, the client cuts the budget by 30%. Today that's a bad month for everyone. With the agent you're the director. You decide where the cost comes out, and it updates the layout, coordinates the structure and MEP, and redoes the drawings. So when design exploration gets this cheap, we go from 3 options to 300, and more options means better buildings. Since August our users have gone through more than 140 billion tokens, and firms like Jacobs, Studio+, Kajima, VMDO, Dekker and hundreds of others use Snaptrude today. In our early access, more than 2,000 designers have run over 25,000 tasks through the agent since September. We also built a benchmark for this, AECBench, because in AEC an almost correct answer is still wrong. It gives AI the same brief an architect would get, has its design in a real BIM model, and scores the result against the brief and against how architects review design. We're publishing the first results today, link below. Thank you @prashanthp at @Accel and Shub and the team at @foundamental for backing us when this was still a bet, and the Snaptrude team, who built every bit of this. Really proud of you all. Thanks to our investors, @scottbelsky, @andreasklinger, @thilokonzok, @immad, @CindyXBi, @DanilaVladi, @jmwass, rahulchaudhary, @adamecourt, Zach Ginsburg, Alex duff, Paul grossinger, really appreciate all the help along the way.

1:52
Snaptrude avatar
Snaptrude@snaptrude·Oct 14

From model to render in minutes. All models and renders created in Snaptrude.

0:07
Snaptrude avatar
Snaptrude@snaptrude·Oct 12

Things that used to take days now take minutes to execute. Snaptrude aligns real workflows with architects. Renders executed in Snaptrude.

Post attachmentPost attachmentPost attachmentPost attachment
Snaptrude avatar
Snaptrude@snaptrude·Oct 8

What you decide in week one is still there in week twelve. From brief to BIM, one continuous model.

0:06
Snaptrude avatar
Snaptrude@snaptrude·Oct 5

Design softwares rarely reshape around your project needs. Here, an architect built this app with no code, for exactly their firm's projects. Built with the App Builder in Snaptrude.

1:30
Snaptrude avatar
Snaptrude@snaptrude·Sep 21

You can now go from a finished multifamily design to a full pro forma, without leaving Snaptrude. MFR Configurator sets up the building, Pro Forma pulls the project data, you set your assumptions, and it builds a workbook with linked formulas. snaptrude.com/app-builder

1:30
Snaptrude avatar
Snaptrude@snaptrude·Sep 15

Snaptrude's curated apps are built to work for everyone, which means they are not built for how your team works. Remix any of them into your own version. Your unit types, your standards, your rules. Private until you publish it to your team. snaptrude.com/app-builder

0:43