←
BehindTheCode with Gerry8,508 posts
BehindTheCode with Gerry avatar

BehindTheCode with Gerry

@_BehindTheCode

Digital Electronics Technician & YouTuber with a passion for digital interfacing. Tinkering with 90’s era electronics & Retro Videogame Development kits.

◷ Joined March 2013▧ 1,182 Photos and videos
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Sep 2

Here we have a Sega Genesis / MegaDrive Development Cartridge by Western Technologies Inc. (Rev “D” model to be exact.)😎🤘 The main board required (x2) 27C64A EEPROMS programmed with a proprietary monitor program firmware. The devkit also came with a full blown #Sega 68000 debugger with register view, code disassembly and breakpoint support. Last but not least, a 32Mbit SRAM daughter board could be added, to upgrade the cartridges available memory. #sega #gamedev #Genesis #megadrive #retrogaming

Post attachmentPost attachmentPost attachmentPost attachment
Kazuyuki Hoshino avatar
⟳ BehindTheCode with Gerry retweeted
Kazuyuki Hoshino@KazuyukiHoshino·Nov 14

Wait a second!! That’s ME! 😂 This footage looks like it’s from around ’93, maybe? 🤔 昔の自分の映像が流れてきてビックリしています…

Sonic was DRAWN with a MOUSE?!

2:45
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Nov 9

👀🤘

ゲームボーイ実機に、PCで作ったプログラムを数秒で転送する開発用カートリッジ『DevCart32k』。 ゲームボーイの通信端子とPCのパラレルポートを接続し、転送したプログラムをカートリッジ内の32KBのRAMで実行します。開発者によるDIYプロジェクトです。 retro-gamer.jp/?p=930260743

Post attachment
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Nov 9

Shown here is an official Nintendo serial programming jig for configuring Wii U GamePads.😎🤘 Used at the Nintendo Uji manufacturing facility in Japan. Dated September 2012. (Two months before the Wii U launch.) Decal translation: “Jigs and tools management label." Nintendo's internal asset tag for factory equipment, dated 2012.09.12, Ver 00. Management (asset) number: [# = 0114024000487] 名称簡易データ書込み治具 DRC: “Name: simple data-writing jig, DRC." 任天堂株式会社宇治工場製品技術部:“Nintendo Co., Ltd., Uji Plant, Product Engineering Department." DRC is Nintendo's internal name for the Wi U GamePad (short for "Display Remote Controller"). USB-B port: connects to a PC running a proprietary factory configuration software. UART connector (5-pin JST-style): Cable interfaces to WiiU GamePad's internal serial/debug port. The enclosure houses a PCB with a USB-to-serial bridge using an FTDI FT232R USB UART IC. Small port label "TWL" = 3DS AC adapter LED indicators: - POWER LED - LED 1-3 (status lights) #Nintendo #WiiU #gamedev #retrogaming

Post attachmentPost attachmentPost attachmentPost attachment
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Nov 3

This is the Sega Saturn CartDev (Rev.A) development kit released by Sega of America. (Circa ~1995)😎🤘 The CartDev “Rev.A” model as shown here; was the first release of this kit. It reportedly had power-supply problems and was quickly replaced with the Rev.B model by Cross Products. This kit was the successor to the Sophia Systems Programming Box making it the last official development kit for the Sega Saturn. Setting studios back by about ~$4,800 USD vs. ~$7,500 for the Sophia Systems Programming Box. It was designed as a more accessible option after Sega took over Cross Products. The system interfaced to a modified Saturn console via the cartridge slot, using an extended cartridge board. The modified Saturn provided a NMI interface cable, a VCD (Virtual CD) port for CD emulation as well as a selectable region switch. Connection to a development PC was established using a High-speed SCSI-2 interface through an Adaptec SCSI card. The CartDev had its own RISC processor to handle communications and not overload the Saturn’s dual SH-2 CPUs. The kit supported NMI’s providing a very robust debugging environment. This was one of the main official environments used during the Saturn’s commercial life cycle for development. Full high-end setups (including ICE emulators, CD systems, sound tools, etc.) cost tens of thousands of dollars in the mid-1990s. The CartDev kit made real-hardware development more practical and affordable while remaining officially supported.😎👌#Sega #Saturn #CrossProducts #gamedev #retrogaming #gamedevelopment

Post attachmentPost attachmentPost attachmentPost attachment
BehindTheCode with Gerry avatar
⟳ BehindTheCode with Gerry retweeted
BehindTheCode with Gerry@_BehindTheCode·Oct 31

Ahh yes, that lines up. I had built a couple of custom VCD interface cables for him for the Programming box. Community members on AsseblerGames were all having a real hard time trying to properly identify the types of connectors those VCD cables used. It ended up being that the official VCD cables used a very specific Fujitsu brand MDR50 type of connector and Fujitsu no longer manufactured them. This was the primary reason why they were so rare and hard to find, let alone properly identifying it. After some intensive research I discovered that HONDA Japan took over manufacturing of this model, not long after it was discontinued. So I found a supplier , ordered the connectors and slapped together a couple of cable assemblies for Shane to test. It all worked out beautifully.😎👌 #Sega #Saturn #SophiaSystems

Post attachmentPost attachmentPost attachmentPost attachment
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Oct 31

Here we have a Sega Saturn Development kit known as the Programming Box by Sophia Systems. This was a massive monstrosity of a target box that replicated the Sega Saturn hardware with debugging capabilities. It included a built-in CD drive that developers could use for loading games via CD-R. However, it was also capable loading builds directly through the VCD or “Virtual CD emulator” port via a special SCSI interface card called the “JVC PC-IF3”. The kit ran proprietary debugging software along with other sophisticated development tools. This was Sega’s first official Saturn development kit, and would later be replaced with the CartDev system by Cross Products (SNASM2). Which Sega eventually acquired in 1995. The Sophia Systems Programming Box is an Ultra rare Sega Saturn development kit that is highly sought after by collectors.😎🤘#Sega #Saturn #SegaSophia #gamedev #retrogaming

Post attachmentPost attachmentPost attachmentPost attachment
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Oct 30

This devkit is sick! 😎🤘 #PCEngine #TurboGFX16 #gamedev

🎂 #PCエンジン、お誕生日おめでとう!🇯🇵 小さな本体に、大きな思い出。❤️ コレクションから一台。今も変わらぬ情熱🎮✨ Joyeux anniversaire à la PC Engine ! Petite par la taille, immense par les souvenirs. ❤️ Une pièce de ma collection à l’honneur. La passion reste intacte ! #PCEngine #Retrogaming #NEC #ハドソン @meijin_16shot @4891ws

Post attachment
BehindTheCode with Gerry avatar
BehindTheCode with Gerry@_BehindTheCode·Oct 14

@mov_axbx Hey chief, I’m hoping you might be able to toss me some photos of the side panel support clips from your ONYX or from the Challenge? 🙏🤞🏻 The small plastic clips that hold the side panel skins. I had all x24 that are issued with the Onyx Deskside model and ai had them in a ziplock when transporting it. The bag was lost in transit. So I’m hoping to possibly 3D Print some to replace them. (I think these clips are the same for both Onyx and Challenge.) I’ve been trying to source replacement parts but as you can imagine, SGI Onyx parts are not easy to come by. Any chance you could take some photos of one of the clips? Front & back view with ruler 📏 for reference? 🙏🤞🏻 It would be awesome to potentially 3D print some replacements.😎👍

Post attachmentPost attachmentPost attachmentPost attachment