←
ben1,286 posts
ben avatar

ben

@benfrdl

making it fly • eng student @airbus • cad @zoodotdev

◷ Joined September 2018▧ 75 Photos and videos
ben avatar
ben@benfrdl·Nov 17

been working for @zoodotdev on this aircraft project for a while now pretty cool to see everything come together

Zoo@zoodotdevNov 17

If you’ve enjoyed my build logs so far or missed a few along the way, we’ve put them all together in a blog post! Check it out below to see how far I’ve come with my single-engine aircraft: zoo.dev/blog/bens-build-logs…

Zoo avatar
⟳ ben retweeted
Zoo@zoodotdev·Nov 14

Ben’s Build Log #20 With most of the engine already modeled, it was time to tackle the crankcase, probably the most complex part of the project so far! Working with Zookeeper, I went through several design iterations, using different review stages to focus on specific areas of the geometry. This allowed me to review and refine individual features before bringing all the improvements together into the final model.

Post attachmentPost attachment
ben avatar
ben@benfrdl·Nov 13

got accepted into the airbus graduate support program it's a pretty selective development program recognizing high-potential dual-study graduates grateful to have been selected, but still unsure whether to join or pursue other opportunities after my bachelor

ben avatar
ben@benfrdl·Nov 12

who is building the sendcutsend of composites? especially with advances in thermoplastic matrices, there has to be a ton of potential for this

ben@benfrdlOct 30

started learning more about composites mostly how ply orientation and stacking sequences affect their mechanical behavior, but also the challenges of turning them into actual structures i think there’s still a lot of room for innovation in how we design and manufacture composites, especially with developments in thermoplastics looking forward to seeing how the next generation of aircraft will make use of these advancements

Post attachment
ben avatar
ben@benfrdl·Nov 10

i’m participating in the @dlr_en drone challenge brunswick, where i’m gonna lead the hardware integration of the drone swarm we’ll develop really excited to take part in a competition with actual flight tests in a realistic scenario will keep you updated on our progress

Post attachment
Zoo avatar
⟳ ben retweeted
Zoo@zoodotdev·Nov 9

Ben’s Build Log #19 For the propeller spinner, I started with a hand-drawn sketch to show the shape I had in mind. I then gave it to Zookeeper to turn it into a 3D model and fit it onto the existing mounting structure.

Post attachmentPost attachment
ben avatar
ben@benfrdl·Nov 8

for anyone curious, i'll give it a try (emphasis on "try", i'm not an aerodynamics prof) when a wing starts moving, air initially tries to flow around the sharp trailing edge, causing the flow to separate and form a starting vortex circulation then develops around the wing in the opposite direction to this vortex, allowing the flow to leave the trailing edge smoothly this results in a pressure difference between the upper and lower surfaces of the wing, generating lift

ben avatar
ben@benfrdl·Nov 8

i bet a lot of engineers would get this wrong it's one of the most common misconceptions in engineering

ben@benfrdlNov 8

ok tough guy, then explain to me how lift is created

ben avatar
ben@benfrdl·Nov 5

visited lufthansa technik yesterday and got to see some vip aircraft there so if you ever need your private 747 serviced, i know a guy

Post attachment
Zoo avatar
⟳ ben retweeted
Zoo@zoodotdev·Nov 4

Ben’s Build Log #18 Next up was figuring out how to mount the propeller to the aircraft. I asked Zookeeper to integrate the propeller hub with the existing spacer and design the forward and aft bulkheads as part of the mounting assembly.

Post attachment
ben avatar
ben@benfrdl·Nov 4

defense tech can be climate tech too dual-use is the key here and historically military spending has helped make a lot of revolutionary technologies possible electric aviation for example has a lot of potential for this kind of two-way spillover

Defense funds realizing they have to pivot back to climate tech

Post attachment
Zoo avatar
⟳ ben retweeted
Zoo@zoodotdev·Oct 31

Ben’s Build Log #17 Before modeling the propeller itself, I asked Zookeeper to evaluate what kind of fixed-pitch propeller would make sense for this type of aircraft and to work out suitable dimensions and blade profiles. He then used that information to create a series of sketches, visualizing the blade shape, twist and overall proportions.

Post attachment
ben avatar
ben@benfrdl·Oct 30

started learning more about composites mostly how ply orientation and stacking sequences affect their mechanical behavior, but also the challenges of turning them into actual structures i think there’s still a lot of room for innovation in how we design and manufacture composites, especially with developments in thermoplastics looking forward to seeing how the next generation of aircraft will make use of these advancements

Post attachment
Zoo avatar
⟳ ben retweeted
Zoo@zoodotdev·Oct 23

Ben’s Build Log #16 With KCL 3.0 released, I asked Zookeeper to migrate the entire project, review the existing code and make sure everything still worked as intended. With that done, I finished the propeller spacer, making use of the improved fillet capabilities in KCL 3.0 to smooth out the transitions around the mounting bolts and structural ribs.

Post attachment