←
Paul Beech 星熊8,008 posts
Paul Beech 星熊 avatar

Paul Beech 星熊

@guru

Product & Graphic Design Geek. Philogynist. Does @Raspberry_Pi stuff. Runs @pimoroni with @lowfatcode. Looks like an angry Paddington Bear.

◷ Joined April 2007▧ 638 Photos and videos
adafruit industries avatar
⟳ Paul Beech 星熊 retweeted
adafruit industries@adafruit·Jun 2

Adafruit Receives Demand Letter From Fenwick Legal Counsel on Behalf of Defy Gravity, Inc. Flux. AI (“Flux”) adafruit.com/flux

Post attachment

Today, we’re excited to share that Flux has raised $37M in new funding, including a $27M Series B led by @8VC, with participation from @BainCapVC, @Liquid2V, and @OutsidersFund. To the Flux community: we couldn’t have done this without you! Your projects and feedback shape what we build.

0:46
Mark Hodgkinson (Hodgy)🐦 avatar
⟳ Paul Beech 星熊 retweeted
Mark Hodgkinson (Hodgy)🐦@iamhodgy·31 Jan 2025

The panels that come with the Pimoroni Interstate75 2350w seem to be a good fit with lego. Here they are sitting perfectly in a gap of 40x40 studs. (plus 1 stud all around the edge 42x42)

Post attachment
Josef Prusa avatar
⟳ Paul Beech 星熊 retweeted
Josef Prusa@josefprusa·4 Aug 2024

PSA🚨 You might have seen the recent videos from @NathanBuilds or an article on @hackaday about the potential dangers of carbon fibers in filaments, comparing it to asbestos 😳 Given that we offer several filaments containing carbon fibers, I thought many of you would be interested in how our materials fare in terms of safety 💡 Since we leave nothing to chance, and we noticed early that carbon fibers can sometimes get stuck on the skin and remain there even after several hand washes, we had thorough laboratory tests conducted by the National Institute of Public Health before we first introduced these materials into production. These tests focused on ensuring the safety of everyone in our factory during manufacturing and your safety when you use and handle these materials. TLDR - our @prusament filaments with carbon fibers and prints made of them are safe ✅ The National Institute of Public Health used two methods of measurement. The skin irritation (image 1) and cytotoxicity (image 2) tests involved 30 volunteers (aged between 29 and 70 years) wearing prints made of PCCF and PA11CF materials taped to their skin. The measurement results showed that none of the volunteers had the slightest irritation even after more than 72 hours of wearing the print on their skin. The other test focused on airborne particles (image 3), measuring dust levels during production and printing with these materials. The results from the dust measurement were well below the established exposure limits. There are several different types of carbon fibers. Some of them (so-called pitch-based) have sharp edges and are therefore easier to catch on your skin and tissue. We do not use these fibers! Instead, we use so-called pan-based fibers, which do not have a sharp edge and therefore do not cause the described problems. Image 4 shows the different types of fiber - A, C, E - Pan and B, D, F - Pitch (Source: aaqr.org/articles/aaqr-19-03…) However, the fibers still can cause irritation if inhaled - e.g. if you sand a 3D-printed part or have carbon fiber part "rubbing" on something. If you are sanding 3D prints, filled with fibers or not, I would always wear a respirator or other respiratory protection. Safety first!

Post attachmentPost attachmentPost attachmentPost attachment