←
HueForge4,659 posts
HueForge avatar

HueForge

@hueforge

HueForge Software for 3D Printing Filament Painting and blending - YES there is a Mac version.

◷ Joined May 2023▧ 392 Photos and videos
HueForge avatar
HueForge@hueforge·Nov 17

I was really hoping to get ColorDrop 2.0 out before FormNext, but it's not going to happen. It's mostly ready, but given I'm leaving tonight and out-of-pocket for the rest of the week, it's not responsible. Look for it early next week. And maybe something extra to apologize.

HueForge avatar
HueForge@hueforge·Nov 13

FYI - my main email address is affected by the current Microsoft 365 outage, so I'm not ignoring you. I just can't see that you've emailed me.

HueForge avatar
HueForge@hueforge·Nov 12

After years of bug reports always going one way, it's nice to finally report bugs to someone else :). And then have them fixed the next day.

3MF Translator 1.0.5 is out📂 Translate for the PrusaSlicer 3.0 alpha, and your print settings now come across when a Bambu Studio or Orca Slicer project changes printer. New: • PrusaSlicer 3.0 alpha as a target: its new project format, its own printers and presets, your filament colors and print settings • Open After opens the project in the 3.0 alpha, in a tab of its own Fixed: • Print settings on a printer change: Bambu Studio and Orca Slicer projects start from the same print profile made for the new printer and keep every print setting • Bambu Studio and QIDI Studio: no more "too large line width" from Orca-based slicers' percentage line widths • H2D and H2C: purge volumes worked out for the right nozzle are no longer 15 mm³ too low • PrusaSlicer is no longer listed after you uninstall it • Linux: PrusaSlicer 2.9 works again beside the 3.0 alpha's Flatpak To update: click Download in the app's update bar, or Help > Check for Updates… Release notes: support.3mftranslator.com/re… Get it: shop.3mftranslator.com/pages… #3DPrinting #PrusaSlicer #BambuStudio

HueForge avatar
HueForge@hueforge·Nov 10

So nice to be able to load my specific HueForge profile version in Orca instead of the generic. Plus this fixes the issue of changing printers causing it to override all of the 3MF filaments to my last loaded filaments.

3MF Translator 1.0.4 is out today 📂 Your own printers and presets now work in every slicer, plus fixes for Bambu Studio 2.9 projects, UltiMaker Cura, QIDI Studio, Elegoo Slicer, Flash Studio and PrusaSlicer. New: • Your own printers: printers you made or saved yourself in the slicer show up in the printer list, including the ones you added in UltiMaker Cura, along with your own process and filament presets Fixed: • Bambu Studio 2.9 projects: newer nozzle types such as Hybrid map to the nearest type each slicer knows • UltiMaker Cura: the right number of extruders, models centered on your bed, and settings kept within the printer's limits so Cura slices • QIDI Studio and Elegoo Slicer: projects switch to the printer you picked • Flash Studio: the AD5X and similar printers get a process that fits them • PrusaSlicer: purge volumes for every tool on tool changers, and wipe towers that slice To update: click Download in the app's update bar, or Help > Check for Updates… Release notes: support.3mftranslator.com/re… Get it: shop.3mftranslator.com/pages… #3DPrinting #BambuStudio #PrusaSlicer #Cura #FlashForge #QIDI #Elegoo

HueForge avatar
HueForge@hueforge·Nov 2

Adding support for paint on supports etc between slicers is a nice touch. So is being able to launch it from Windows Explorer or Finder. If you need it, you want this to make your life so much easier.

3MF Translator 1.0.2 is out now📂 Preview each target's plates before you translate, leave unused filaments out, and open .3mf files straight from Explorer or Finder. New: • Preview: a target's plates on its printer's bed, in your filament colors, with a fit check • Remove unused filaments with one tick • Right-click a .3mf file > Translate with 3MF Translator (on a Mac, open the app once, then turn it on under Quick Actions > Customize…) • Each file opens in its own window, sharing your targets and groups • Recolored filaments get new purge volumes on Bambu Studio and Orca-based targets • Linux: the AppImage now comes in a .tar.gz and stays executable Fixed: • Dragging spools in the Filaments editor • Extra filaments on PrusaSlicer printers go into slot 1, with pauses in the right color • PrusaSlicer projects switch to the printer you pick • Painting carries between PrusaSlicer and Bambu Studio / Orca • PrusaSlicer and Cura projects get purge volumes from their colors To update: click Download in the app's update bar, or Help > Check for Updates… Release notes: support.3mftranslator.com/re… Get it: shop.3mftranslator.com/pages… #3DPrinting #bambulab #Prusa #Snapmaker

Additive Atom avatar
⟳ HueForge retweeted
Additive Atom@AdditiveAtom·Oct 28

Today I'm launching 3MF Translator to the world 🚀 It's what I've been hard at work on, and I'm proud of how it turned out. 3MF Translator 1.0: 3D Printing's Universal Translator. Ever found a project made for someone else's slicer and printer? A MakerWorld project set up for a Bambu Lab printer when you print on a Prusa, or a PrusaSlicer project when you use SnapOrca? Until now that meant exporting the parts, rebuilding the project in your own slicer, assigning every filament again, redoing the color changes and hoping the settings matched. Then doing it all again for your next printer. 3MF Translator does it for you. Open the .3mf, pick your printers, click Translate, and get a native project for each one, with the plates, filaments, colors and settings already in place. What it does: • Native projects, not just meshes. Plates, objects and parts, filament assignments and colors, color changes, height range modifiers and your print settings, written in the target slicer's own format with your printer's own presets. • Every printer you own in one click. Save each printer once, group them in tabs like "Shop" and "Farm", and one Translate makes a ready project for all of them. • Fits your filament slots. Eight colors and a four-slot AMS? Reorder, merge and recolor the filaments to match your AMS, CFS, MMU or tool changer. Color changes follow. • Plates that fit your bed. Translate every plate or only the ones you pick. It warns you when a plate won't fit, and Rotate 90° turns the plates when that makes them fit. • See it first. Every plate in 3D, in its filament colors with the color changes. • Opens in the right slicer when it's done. Twelve slicers, both ways: Bambu Studio, Orca Slicer, Snapmaker Orca, Creality Print, Anycubic Slicer Next, Elegoo Slicer, Flash Studio Desktop, QIDI Studio, PrusaSlicer, QIDISlicer, SuperSlicer and UltiMaker Cura. Windows, macOS and Linux. Your files never leave your computer, and your original file is never changed. One purchase with a year of updates, and your version keeps working after that. HueForge 3MF Export Plugin owners save 10%, applied automatically at checkout. Get it: shop.3mftranslator.com/pages… Guides and FAQ: support.3mftranslator.com #3DPrinting #BambuLab #PrusaSlicer #OrcaSlicer #Snapmaker #3MF

HueForge avatar
HueForge@hueforge·Oct 13

It might have taken a week longer than planned, but HueForge 0.9.4.4 is released! (Release notes here open.substack.com/pub/hornan…)) I also have bugfix and feature updates for ColorSmith, HugeForge, FlatForge, and ColorDrop (not 2.0). I can't tell you how much better life is with LAN Sync and Match Fix, two headline new features of this release. Go download your copy from shop.thehueforge.com

HueForge avatar
HueForge@hueforge·Oct 2

I think people underestimate what soaking in a subject matter for years does to your ability to solve problems in it. I started HueForge without an inkling of color theory or of the variety of color models out there. I had NO idea how hard it would be to get a computer to tell two colors apart. Now - with the help of coding tools and over 3 years of work in the space - I can solve problems in hours that I just didn't have a framework to solve in the past at all. It was the earned expertise that suddenly makes old, intractable problems, well, easy to formulate and solve. None of my coding agents have ever suggested these solutions, the quality of the request for complex tasks is super important, but without them, I would not be able to experiment and develop novel solutions (well novel to me) to problems that my user's have had for years. It's a crazy new world in software, but experience still matters a WHOLE lot.

HueForge avatar
HueForge@hueforge·Oct 1

Finally added a feature I wanted! The ability to reorder your filaments to match your printer ahead of time. Yes you can remap them, but it's way easier to import them matching the existing order. I'm excited!

🎉 3MF Export 1.1.0 for HueForge: release notes 3MF Export 1.1.0 opens your project in the slicer you exported for, and lets you choose which slicer slot each filament loads into. It also centers models on more printers. ✨ New features 🚀 Open in the slicer you chose: Open 3MF after export now launches the slicer you exported for, not whichever app your computer links to .3mf files. If your slicer isn't found, you're asked to locate it once. On Linux, Flatpak installs of Bambu Studio, OrcaSlicer and PrusaSlicer are found too. 🎨 Choose the filament order: the new Filament Order row has an Edit… button for picking which slicer slot each filament loads into. Your order is kept until you change filaments or open a different project, and Reset returns it to HueForge's order. 💡 A one-time tip explains the Open 3MF after export option. 🛠️ Improvements 📁 Safer file names: project names are cleaned up before they become file and folder names, including trailing spaces, characters Windows doesn't allow, and reserved names such as PRN. The 3MF is saved in the same folder HueForge uses. 📐 Bed-fit warning follows Rotate 90 Degrees: the "too large for the bed" warning updates as soon as you turn rotation on or off. ⚡ The Export 3MF dialog opens faster: about five times faster the first time, and almost instantly after that. 🐛 Fixes 🎯 Models are centered on the bed for Flashforge Adventurer 5M, 5M Pro and A5, and for imported PrusaSlicer-family profiles with an offset bed. 🛒 Get it: shop.thehueforge.com/pages/3… 📖 Docs and support: support.3mfexport.com #HueForge #3DPrinting #BambuStudio #OrcaSlicer #PrusaSlicer

HueForge avatar
HueForge@hueforge·Oct 1

A test print for Color Drop 2.0 done in 6 colors on the @Prusa3D XL (swapped from black to white after the base was printed).

Post attachment