
If you need to message me for an inquiry and you don't have twitter blue, please send me an email at info@ifixretro.com.

We love old school games and preserving it by rebuilding the hardware, making it better and funky fresh for you! video games everyday. email: info@ifixretro.com

If you need to message me for an inquiry and you don't have twitter blue, please send me an email at info@ifixretro.com.

Rebuilding the A/V connector port. Whoever worked on this did some serious damage on the port.

RGB amp installed on the Turbo Duo console! Play your games in crispy ass RGB display with the cleanest picture possible and free of jailbars!

Check out the monstrosity that this system has been through. Goddang Chong's


There was quite a bit of corrosion underneath the op amps and the legs were corroded. All cleaned up and patched up!

Turbo Duo console repaired properly! This system was worked on numerous times by other people and unfortunately, they weren't able to get the sound working and damaged alot of the pads in the process. I was able to find out what the issue was, and there was cap leaks underneath the op amps, so I replaced a few of them and repaired some of the broken traces underneath it. It now plays both hucard and CD audio properly!

It's like 30 years now for Sony PlayStation. How did this system come to fruition? I was pretty amazed at hearing the story.



After scratching my head for so long trying to figure this out, I reflowed the tsop chips on the board and reprogrammed the eprom chips for safety measure. Also, the ribbon connector was ripped right off, so I took care of that.

Irem M92 Darksoft Apocalypse multi game kit repaired! The M92 board was experiencing a few issues; the flex ribbon connector on the board got ripped off from the board, so I reflowed the connector back in its place, and after that, all the games were showing signs of graphical sprite corruption on them. I reflowed the tsop chips on the graphical side and reprogramed the EPROMs for safety measure and it's working again without any hiccups!


Super Nintendo console recapped and voltage regulator swapped out! Replace the capacitors on the system to ensure that the functionality of sound power and image continues to work in the long run!

After many years of waiting and missing the availability window to get an Easy Arcade 2 from @shuichi_takano, @4amlaundry came through and finally got me one! This supergun is absolutely amazing as it provides USB C PD power, RGB video out using a Nintendo multiout cable, accepts USB controller for input. It's so well engineered! Thank you so much for this.

Neo Geo MV2F MVS arcade board recapped and 4.0 Unibios hooked up. Replace the capacitors on the board to ensure that the functionality of sound, power and image continues to work in the long run, and have the ability to toggle between AES/MVS mode, enable cheats, set region and much more!