←
Phil Stevens4,877 posts
Phil Stevens avatar

Phil Stevens

@philwithadrill

Tall chap in short socks, B7 fan, maker and repairer of props, models and all sorts of stuff.

◷ Joined August 2018▧ 2,417 Photos and videos
Phil Stevens avatar
Phil Stevens@philwithadrill·10h

I’ve now sprayed the last main section silver. It’s looking very shiny! One slight problem - I’ve run out of places to put it while it’s drying! I’ll have to dangle it off some EMA tubing overnight. Keep it up! Ooh, Matron!! 😂😂😂 #tv21film

Post attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·10h

Hi-ho, Volvo Silver! 😄 Everything gets a coat! Now I’ve just got to find somewhere where these bits can dry without getting dusty! #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·10h

I’ve dug out the bag of the small bits of the Dalek, as they’ll need to be sprayed with the new Volvo Silver, too. One of the gun vanes has snapped off in storage, but it’s a clean break. A bit of superglue has fixed that! 👍 Everything’s getting a light sanding. #tv21film

Post attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

Check out my sticky bottom. 😂 That’s right, I’ve stuck double-sided tape to the underside of a mixing pot. Just the job for holding the neck section, so I can spray the whole thing! Now comes the ”fun” of painting black between the uprights … 😮😮😮 #tv21film

Post attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

About a half hour after I sprayed the primer, it has dried enough for me to spray on the metallic blue. First time I’ve seen this colour sprayed in a large area before. I think it will look nice on screen. 👍 #tv21film

Post attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

With the base sprayed, I bolted the 40 hemispheres to a chopped-up cereal packet! 😀 It’s useful for doing stuff like this, and it’s free! 😊 I’ve used the Hycote primer. I gave all the black areas (where I’d sanded) an initial coat, before spraying everything. 👍 #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

Testing the paint shroud. After I’d sprayed the satin black on, off with the shroud, then careful peeling off of the masking tape. There - a nice sharp line … and no paint pulled off! I suspect that’s because the Halfords primer was sprayed over the old paint. 😊 #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

I’ll have to mask and spray ten bases at some stage. Rather than spend lots of time using bits of newspaper and whatever is to hand, I’ve made a reusable “shroud” to cover most of the skirt. Just masking tape at the edge and more to hold the shroud in position. 👍 #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 17

“The Return Of The Naughty Nine”. 😜 The nine hemispheres that needed tiny bits of filler have now been sanded and degreased, so they can join their 31 friends, ready for priming. 😀 #tv21film

Post attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 16

Before I got the paint out, I re-drilled all the centre holes, as the bolts are a larger diameter than the original nails. There - the skirt is Volvo Silver! I’ll spray the fender black later. Hemispheres have been degreased, a few need a small bit of filler. 👍 #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 16

The base plate is nice and firm, so I added the castors that I’d originally used on it for testing. But … The front (swivel) ones are slightly taller, so I’ve put swivel castors on the back as well! That’s better, so I’ve degreased the whole thing, prior to paint. #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 16

Let’s get straight into this … Masking tape, pressed firmly on the gold, then a couple of coats of Halfords’ metallic grey. After 10-15 minutes, I pulled the tape off. Also tried scratching the gold with my fingernail. They’re good! Halfords primer is the problem. #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 15

While the paint test is drying, I’m going to mount one of the ply baseplates in the prototype’s base. I inserted it using my jig and hot-glued in place. I then removed the jig and “glued” the ply baseplate into place with a Cab-O-Sil/resin mix, applied on the inside. #tv21film

Post attachmentPost attachmentPost attachmentPost attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 15

🎶 Goldfingerrrrr! 🎶 Actually, it’s my thumb. 😀 The primers are dry, so I’m on to the next step - I’ve given everything three thin coats of Halfords gold paint. That’s now touch dry, so I’ll leave it somewhere warm to dry through until tomorrow (approx. 18 hours). #tv21film

Post attachment
Phil Stevens avatar
Phil Stevens@philwithadrill·Nov 15

Five shades of grey. 😮 No, not naughtiness on a budget, the five grey primers have been sprayed on, in equal bands. That’s quite a colour range! I dried each band with a hairdryer before I sprayed the next one. It’s all touch-dry already! 😁 #tv21film

Post attachment