←
Kyle Cothern49,194 posts
Kyle Cothern avatar

Kyle Cothern

@risknc

Founder Flotilla | Former SpaceX, Vast | Emily the world is grey without you. May we meet again after this life. Fair winds and following seas.

◷ Joined September 2008▧ 15,012 Photos and videos
Kyle Cothern avatar
Kyle Cothern@risknc·Sep 20

Someone very important to me left the world today. I will never recover from this. Hug your friends, tell them you love them.

Kyle Cothern avatar
Kyle Cothern@risknc·22h

Honestly if someone made YC for talented engineering teams and took a smaller cut they'd do great. Just gotta filter aggressively.

Kyle Cothern avatar
Kyle Cothern@risknc·Nov 17

I don't think they had the loop rates or instrumentation/ sensor data that take it from lucky to feasible. Also the engineering was just way more painful in the punchcard era. The pieces were there but the integrated functional systems were still far off

SpaceX and others have taken advantage of modern computer developments to improve landing efficiency, but fundamentally, there is no reason we couldn’t have done the same thing just a bit less efficiently in the 1960s.

Chris Gallaty avatar
⟳ Kyle Cothern retweeted
Chris Gallaty@cgallaty·Nov 16

I mean, what are the odds that a single tile failed.... oh wait.

Post attachment
Kyle Cothern avatar
Kyle Cothern@risknc·Nov 13

I see "this is why we test" in the future.

Rockets are not hard, apparently. “Of course rocket engineers are going to get mad with me, but you can simplify it as a big tank feeding engines,” he said of the rocket. “So big tanks—we know how to do them. We know how to do them in composite.” arstechnica.com/space/2026/1…

Aaron Burnett avatar
⟳ Kyle Cothern retweeted
Aaron Burnett@aaronburnett·Nov 9

thanks to AI, now we know what starship's pez dispenser would sound like if space wasn't a vacuum.

0:30

my vocal synth models the vocal tract as a network of branching acoustic tubes, unlike vocaloid which stitches together and pitch-shifts phoneme recordings. still working on improving naturalness by tuning it against recordings of real singers, but I'm already impressed at how cool it sounds!

2:25
Kyle Cothern avatar
Kyle Cothern@risknc·Nov 8

the goal was to fit check and form tests for parts before injection mold. for decorative stuff, low risk designs, fixtures, it's awesome. kitbashing one mfg process because it's all you've got or know is pretty common, but pins off a lathe are always going to beat a mill.

Kyle Cothern avatar
Kyle Cothern@risknc·Nov 8

You can qual just about anything with enough effort. it's worth flagging that FDM parts have way more issues than isotropic materials with certs. but with QA, statistics and test equipment you can qual printed plastic parts for sure. do you want to?

FDM parts of any material are an inappropriate (and i would argue unsafe) choice for any loaded application where they’re critical (supporting humans, a part of a critical safety mechanism, etc.) this goes beyond anisotropy (which is a challenge, but solvable). you could in theory use non-linear FEA to model the behavior of the part, but it takes a herculean effort and still doesn’t provide the whole point of FEA in the first place for safety critical parts — the predicted failure mode at a specific loading this isn’t because these parts are hard to model, instead, it’s because FDM is inherently flawed. there are no guaranteed mechanical properties. vendors will list toy values on their websites, but they do not reflect the “real” values and are misleading. real means as built every car, plane and multi-story commercial building utilizes an important property of materials that manufacturers have gifted to engineers over the centuries, and that’s reliable mechanical properties aluminum, steel and most metals have a yield or ultimate value by which engineers design to, enabling us to predict when and how parts will fail. FDM does not, and it isn’t the material’s fault, it’s the process’s fault when i analyze a part, it produces values by which i can meter against mechanical properties of the material. the main problem with FDM is that it does not. the process itself invalidates the underlying mechanical properties the produced part does not have bulk material properties of the constituent material due to the geometry of the “lay up” of the filament that produces the part. this means an accurate analysis would not be on the “as modeled part”, it would have to be on the “as manufactured” model of the part, or the “sliced” model of the part and even if you did this: it would still be for moot because the shear resistance of each layer produced is dependent on the orientation and settings of the print and the environment in which it was printed. the properties can vary wildly between prints i won’t even get into cold flow which is exacerbated by this lamination issue. i still think FDM is great in the limited cases of onesie-twosie fixtures and tooling here’s a solution: sheet metal is cheap. use a sheet metal substrate to build up the load bearing structure of your parts. they become safe with proper analysis and can also get rid of the temperature independent cold flow problems that hamstring most FDM parts

Kyle Cothern avatar
Kyle Cothern@risknc·Nov 6

But why don't you spin up docker and create some new API tokens to turn down the von mieses stress on the surface of this turbo shaft.

Kyle Cothern avatar
Kyle Cothern@risknc·Nov 6

Software engineering isn't engineering at all. So by this line of reasoning... We all end up nihilists on a subscription ramp towards total enshittification.

"Most hardware engineering is actually software engineering in disguise."